We've partnered with E3D to be a US distributor of their E3D HotEnds!
IMPORTANT NOTE: As of 3/2/20, Hemera is out of stock. No ETA at this time. More details here.
E3D's newest product -- formerly known as Hermes -- is a next-generation extruder featuring dual drive gears, a highly constrained filament path, and autoloading compatibility.
E3D Hemera significantly reduces slipping, grinding, and stringing. Want to print flexible materials? No problem. It prints flexible filament fast and with ease. Designed to be universal, you can use E3D Hemera as either a direct HotEnd or as a bowden extruder with an adaptor.
Learn more about development and capabilities by reading E3D's blog post.
E3D Hemera is a dual-drive system with a hardened stainless steel drive train. Individually CNC cutting each hobb allows for a round-bottomed root, with a tooth that curves upwards to a robust, sharp tip. The round bottom of the profile strongly resists filament debris wedging into the drive gear and in almost all cases it’s self-cleaning as any debris simply falls off the teeth.
Hemera uses a custom motor based off a NEMA17 frame, modified with our endcap designs. This allows the motor itself to be part of the assembly, incorporating features such as bearing pockets and mounting points. Ultimately creating a smaller, more compact system with a lower overall part count.
There are 4 T-slots on each side of the motor leaving endless mounting opportunities. Utilize one side for mounting to the printer and the other side for sensors, probes and part-cooling fans.
Along with a very short filament path from hobb to meltzone, the filament is tightly constrained. As a result of closely tolerancing all the components, we are also able to achieve a clearance gap between filament drive wheels and heatbreak of only 100um.
This means that flexible filaments such as TPU’s can be printed on Hermes with similar print speeds to PLA. To put it simply, we’ve made printing with flexibles easy!
An optimized heatsink ensures airflow is diverted up and away from both the HotEnd and the heated bed. This reduces the risk of warping and uneven stresses forming in the printed part; optimised airflow also means we can supply a quieter fan.
Hemera is interchangeable between Direct and Bowden variants. To create a bowden Hemera, simply remove the hotside and fan, then insert the Hermes bowden adaptor.
215mm x 75mm x 50mm
In stock, ready to ship. Only available in 1.75mm.
In stock, ready to ship. This kit allows you to adapt your E3D Hemera for use...
On hold, pending word from E3D. Heatsink assembly for the E3D Hemera.