Railcore II 300ZL/ZLT Acrylic Single Door by Mandala Rose Works

$45.00 $88.99

Type
Size
Front panel opening width

In stock, ready to ship. 

You have the choice between smokey grey or clear acrylic.

The single door is based on the design of J. Steve White for the 300ZL, and modified to fit the 300 ZLT. They are designed to go flush with the outside of the printer, not inside the cutout. The hardware kit can be downloaded from thingiverse at:
https://www.thingiverse.com/thing:3412430

Make sure to use the hinge part that attaches to the printer labeled "FixedHingeFor6mmDoors.stl" as they are thicker to account for the 6mm acrylic.

You will also need a different drill guide, which is available from https://www.thingiverse.com/thing:3591742.

An alternate hinge style designed by Wade Wendorf is available at https://www.thingiverse.com/thing:3680655 and is a 100% printed hinge with no need for a bolt to be used as a pin.