$99.99
In stock, ready to ship.
Supports Klipper firmware
STM32F446 MCU
1x Vin 24V Mainsupply (polarity and overvoltage protected)
1x Vin 24-48V TMC5160 supply (polarity and overvoltage protected)
5x TMC2209 onboard drivers (24V)
2x TMC5160 onboard drivers (24-48V), onboard 12V source for gate drive
4x Thermistor inputs
4x Fan outputs (with tacho signal support, 5/24V via jumpers)
1x Probe input (5/24V via jumper)
1x Filamentsensor input (5V tolerant)
1x Neopixel output
3x Endstop inputs (5V tolerant)
1x Hotend heater output (max. 180 W, 7.5 A)
1x Heatbed heater output (max. 240 W, 10 A)
1x dimmable LED-strip output (350mA constant current source)
1x EXP1 port
1x EXP2 port
1x Extension port (4x ADC, 1xUART, 1xSPI or 1xCAN, 10GPIO, 3.3V@0.5A, 5V0.5A, 24V@0.5A)
1x STM32 programmer interface (backup)
1x USB-C interface
1x CAN Bus interface (MicroFit 3.0 connector)
1x RPi Powersupply (5-pin JST-XH connector with UART support)
Mounting holes for RPi Zero 2W and RPi3/4
Better stepper driver cooling
Dimensions: 170x100mm, Mounting holes: 160x90mm
Documentation: https://github.com/MotorDynamicsLab/Leviathan
