E3D Titan Aero (extruder/hotend combo)

Filament
Version
Voltage

On backorder, ETA 5/1/17.

Each E3D Titan Extruder product comes with all the parts for 1.75mm and 3.0mm filament.

Titan Aero is an integrated heatsink for Titan that replaces the standard polycarbonate lid. This gives a compact, rigid extruder with precise extrusion, it's intended to be good with flexibles whilst not being exclusively for them. 

List of what's in the box available here. Note that a printed bracket is not available by default, but can be added here. Note that a stepper motor is not included by default, you can find stepper motors in the Electronics section.



Titan Aero Key Features:

  • Ultra compact design, giving an extra 25mm of Z build height compared to a V6 and Titan combo.
  • Short filament path, making printing flexibles easier to do.
  • The short filament path also makes the extruder more responsive, improving print
  • quality.
  • Includes the existing benefits of both Titan and V6.
  • All metal HotEnd that can print any thermoplastic at temperatures of 300+
  • degrees celsius.
  • Available in 1.75mm and 2.85mm, standard and mirrored versions
  • Compatible with the rest of the E3D V6 ecosystem, allowing you to switch out
  • sensors, heaters and nozzles for your application.
  • Reliable and easy to maintain extruder.
  • Geared extrusion for greater accuracy and lower weight.

Overview

Titan Aero integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own. Ready to buy as a complete kit or as an upgrade for your Titan extruder, in both 1.75mm and 3mm diameters. Mount two side by side by pairing the standard and mirrored versions, and make the most of your build volume in dual set-ups. Check out the E3D blog post to find out more about the engineering behind Titan Aero.

Compact & Rigid

By combining a HotEnd and extruder, Titan Aero is ultra compact. It offers you an extra 25mm of Z- axis build height compared to a V6 and Titan combo. Thanks to its compactness, Titan Aero is also very rigid, allowing it to work with the fastest of printers and cope better with knocks and bumps.

Accurate Extrusion, Great for Flexibles

By having a short, well constrained filament path, Aero is great for flexibles. It minimises places where filament can bend, buckle and jam, giving a better flexibles printing experience.

The short filament path is also beneficial for regular filaments by improving responsiveness. This means that extrusion can start and stop more immediately, giving accurate, cleaner prints.

V6 Compatible, All Metal Hotend

Titan Aero is built on the E3D V6 all metal design, allowing you to reliably print any thermoplastic at temperatures of more than 300°C.

It’s also been designed to take standard V6 heatbreaks, so that you can interchange components from E3D’s entire modular ecosystem to suit your needs. Choose from temperature sensors, heater cartridges, Volcano, or one of the 92 different nozzles we provide.

List of what's in the box available here.

Easy to Install, Easy to Use

Aero is mounted using a standard NEMA17 pattern, allowing it to be fitted onto a wide range of printers and making designing mounting solutions straightforward to do.

By using Titan’s custom engineering and rigorously tested extrusion mechanism, Aero is highly reliable and retains all of the smart usability features. It’s a breeze to load and unload filament, manually extrude, adjust idler tension, and clean out debris from the hobb.

Likewise the use of Titan’s 3:1 gearing ratio allows the use of smaller motors, making for a lighter weight carriage whilst maintaining reliability and pushing power.

Box Dimensions: 20cmx12cmx8cm
Boxed Weight: 0.285kg

 

Related Items