E3D SuperVolcano

Size
Type
Voltage
In stock, ready to ship.
We've partnered with E3D to be a US distributor of their E3D  HotEnds! $4 shipping in the US, $12 shipping internationally.

 

The E3D SuperVolcano: For when your E3D Volcano is not fast enough.

The E3D SuperVolcano is the newest member of the E3D family, pushing you to print even bigger and faster than ever before! Are you looking to find out more about the design process? Check out the blog post and find the assembly guidelines here.

Packs Include: 

Eruption Pack: Four nozzles (0.8/1.0/1.2/1.4mm), 80W heater cartridge, thermistor cartridge, heater block, and SuperVolcano sock.
Starter Pack: 1.0mm nozzle, 80W heater cartridge, thermistor cartridge, heater block, and SuperVolcano sock.
12volt packs include a MOSFET board, since 12v SuperVolcano heater draws more current than most printer controllers can handle.


  1.  Faster than ever

The SuperVolcano is the gift that keeps on giving, boasting up to 11x the volumetric throughput of the market leading V6, this beast is the answer to your slow speed printing prayers.

  1.  High temp performance

The SuperVolcano can comfortably reach 285°C, and when you swap a thermistor for a thermocouple or PT100 you'll be able to exceed 400°C. This not only allows you to print extremely high temperature materials like PEEK and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs.

  1.  Great interlayer and bed adhesion

The SuperVolcano gives you the ability to print wider and higher tracks. This provides a greater area for these tracks to bond to each other and in turn increases the interlayer adhesion, creating very strong parts. These wide tracks also help with bed adhesion, reducing the chance of prints warping and breaking off the bed mid print.

  1.  Space for a second thermistor

If extra redundancy/monitoring of your HotEnd performance is what you’re after, then feel free to add another thermistor into the equation (not that its required).

  1.  Full range of nozzles available

Available in Brass, Nickel Plated Copper and Hardened Steel, we have nozzles in the following sizes: 0.6, 0.8, 1.0, 1.2, and 1.4 (for when you have a high speed motion system and your build volume is large enough). We would advise using a 1.0mm nozzle for the best speed to detail results.

  1.  Compatible with the E3D ecosystem

This SuperVolcano upgrade kit is fully compatible with the E3D HotEnd range. Attach with ease to your V6, Lite6, Titan Aero, Titan Aqua, Chimera, Chimera+, or if you're feeling brave, the Kraken!

Benchy Size (%)

Hot End

Nozzle Orifice Diameter (mm)

Time

Nominal Print Speed (mm/min)

Nominal Volumetric Throughput (mm^3/min)

Track Width (mm)

Track Height (mm)

Weight (g)

100

V6

0.4

1 hr 4 mins

5000

600

0.48

0.25

12

130

Volcano

0.8

0 hrs 50 mins

3500

1176

0.96

0.35

29

135

Volcano

0.8

1 hr 0 mins

3500

1176

0.96

0.35

34

180

SuperVolcano

1

1 hr 4 mins

5520

3312

1.2

0.5

72

225

SuperVolcano

1.2

1 hr 7 mins

4250

4590

1.44

0.75

143

500

V6

0.4

27 hrs 6 mins

5000

600

0.48

0.25

622

0.8

17 hrs 5 mins

2520

846.72

0.96

0.35

889

Volcano

0.8

14 hrs 16 mins

3500

1176

0.96

0.35

891

SuperVolcano

0.8

12 hrs 53 mins

4235

1422.96

0.96

0.35

837

1

7 hrs 42 mins

5520

3312

1.2

0.5

989

1.2

6 hrs 1 min

4250

4590

1.44

0.75

1095

925

SuperVolcano

1.4

19 hrs 45 mins

4000

6600

1.65

1

4888

 

*These figures are from E3D's internal testing, please note yours may vary.

 

Related Items