Printed Parts for Railcore II ZL/ZLT

$19.99

Style

In stock, ready to ship.

Printed parts as used in our Railcore kits. All parts work for both the ZL and ZLT. It is recommended to use metal parts instead of Bag 2 if you are building a 300 ZL.

Printed in Veracity BLUE PLA, Atomic Filament black CF-PETG, Atomic Filament black CF-ABS and multi-jet fusion.

What's included in each bag as well as details on material and other notes are below. 


Next Previous


Bag 0 

Item Name Qty Details (material, infill, support) Notes
Idler_Spacer 2 PLA, 50%, No For spacing the idlers so the belts are stacked at the proper height
ModifiedEBoxCorner 4 PLA, 20%, No Corners for the electronics enclosure, recommend 4 perimeters
Filament_Guide 1 PLA, 20%, No Used for attaching a PTFE Filament guide to your extrusions
ZL_Foot 4 PLA, 20%, No Plastic feet to sit the printer on
Cable_clip 1 PLA, 25%, No Holds the extruder harness to the frame, recommend 4 Perimeters


Bag 1

Item Name Qty Details (material, infill, support) Notes
Belt_Retainer_Clip 4 CF PETG, 75%, No Holds the belts in the Y carriage
Y_Carriage 1 CF ABS, 75%, Yes Y carriage to mount the extruder assembly to the Y rail, plus belt termination points
Y_Endstop_Mount 1 CF PETG, 75%, No Arm for attaching the Y endstop to the Y carriage
X_Endstop_Mount 1 CF PETG, 75%, No Arm for attaching the X endstop to the frame
BLTouch_Mount 1 CF PETG, 75%, No Arm for attaching an IR probe to the Y carriage, or optionally for a BLTouch
BMG_Mount 1 CF PETG, 75%, No Mount for attaching a BMG extruder to the Y carriage


Bag 2

Item Name Qty Details (material, infill, support) Notes
ZL_Z_Yoke_1 1 CF ABS, 75%, No Used for attaching bed to linear rails
ZL_Z_Yoke_2 2 CF ABS, 75%, No Used for attaching bed to linear rails
Z_Bracket_Top 3 CF PETG, 75%, No Used for attaching the Z extrusions to the frame
Z_Bracket_Bottom 3 CF PETG, 75%, No Used for attaching the Z extrusions to the frame 


Bag 3

Item Name Qty Details (material, infill, support) Notes
Duct_Printed_Mount_v2 1 MJF (Multi Jet Fusion)
Duct_Printed_Mount_Adapter 1 ABS, 75%, No
Duct_Printed_Mount_Spacer 1 ABS, 75%, No

 

Opt 1

Item Name Qty Details (material, infill, support) Notes
E3DV6_Groove_Mount 1 MJF (Multi Jet Fusion)
E3DV6_Groove_Mount_Retainer 1 ABS, 75%, No

 

 STLs can be found here.