In stock, ready to ship.

Railcore ZL
Size: 300mm x 300mm
Power: 750W @ 120V or 240V;
1)     w/ optional 150C thermostat,
2)     One wire 0.7m long with ring terminal, the other wire 0.94m
3)     Surface mount NTC thermistor +0.7m extension wire + 2 pin connector
4)     3M adhesive backing

Railcore ZLT
Size: 300mm x 300mm
Power: 750W @ 120V or 240V;
1)     w/ optional 150C thermostat,
2)     One wire 1m long with ring terminal, the other wire 1.24m; 
3)     Surface mount NTC thermistor +1m extension wire + 2 pin connector
4)     3M adhesive backing

Railcore RCMini 
Size: 150mm x 150mm
Power: 125W @ 24V;
1)     w/150C thermostat,
2)     0.5m power wires  with ring terminal
3)     Surface mount NTC thermistor +0.5m extension wire + Würth 2P connector
4)     3M adhesive backing 

Jubilee
Size: 300mm x 300mm
Power: 75wv @ 120v
1) w/150C thermostat,
2.) One wire 0.7m the other wire 0.94m power wires with O terminal
2) Surface mount NTC thermistor +0.95m extension wire + Dupont 2P connector

(As of June 2024, Jubilee beds come with Lohmann DuploCOLL 103 adhesive backing, rated to 200C continuous)

200x200 - 500W - 120V
This silicone heater from Keenovo measures 200x200mm square and offers 500W of heating power at 120V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

240x240 - 600W - 120V
This silicone heater from Keenovo measures 240x240mm square and offers 600W of heating power at 120V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

300x300 - 750W - 120V
This silicone heater from Keenovo measures 300x300mm square and offers 750W of heating power at 120V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

120x120 - 120W - 24V
This silicone heater from Keenovo measures 120x120mm square and offers 120W of heating power at 24V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

150x150 - 300W - 120V
This silicone heater from Keenovo measures 150x150mm square and offers 300W of heating power at 120V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

280X280 - 600W - 120V
This silicone heater from Keenovo measures 280x280mm square and offers 600W of heating power at 120V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

SNAKEOILXY 250MM - 500W - 110V
This silicone heater from Keenovo measures 240mm x 230mm  and offers 500W of heating power at 110/120V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

MICRON+ 180 - 300W - 120V
This silicone heater from Keenovo measures 180mm x 180mm square and offers 300W of heating power at 120V. For use with the Micron+ 3D Printer (180). It comes standard with a high temperature 3m adhesive backing. Includes integrated NTC 100k thermistor.

CREALITY ENDER 6 - 500W - 120V
This silicone heater from Keenovo measures 290mm x 290mm and offers 500W of heating power at 120V. It is sized for use with the Creality Ender 6 or comparable build plates and comes standard with a high temperature 3m adhesive backing. Includes integrated NTC 100k thermistor.

CREALITY CR-10 - 310MM - 750W - 120V
This silicone heater from Keenovo measures 310mm x 310mm square and offers 750W of heating power at 120V. It is sized for use with the CR-10/CR-10S Pro or comparable build plates and comes standard with a high temperature 3m adhesive backing. Includes integrated NTC 100k thermistor.

CREALITY ENDER 3 - 235MM - 350W - 24V
This silicone heater from Keenovo measures 235mm x 235mm square and offers 350W of heating power at 24V. For us as a drop in replacement for the Creality Ender 3. It comes standard with a high temperature 3m adhesive backing. Includes integrated NTC 100k thermistor.

CREALITY ENDER 3 - 235MM - 350W - 120V
This silicone heater from Keenovo measures 235mm x 235mm square and offers 350W of heating power at 120V. It comes standard with a high temperature 3m adhesive backing. Includes integrated NTC 100k thermistor.

FOR ZEROG HYDRA (PLUS) - 1000W - 120V
This silicone heater from Keenovo offers 1000W of heating power at 120V. It comes standard with a high temperature Lohmann adhesive and cut specifically for use with ZeroG's Hydra system (size 377). Includes integrated NTC 100k thermistor.

FOR ZEROG HYDRA (PRO) - 600W - 120V
This silicone heater from Keenovo offers 600W of heating power at 120V. It comes standard with a high temperature Lohmann adhesive and cut specifically for use with ZeroG's Hydra system (size 255). Includes integrated NTC 100k thermistor.

ANNEX ENGINEERING K3 - 120V - 300W
This silicone heater from Keenovo measures 170mm x 170mm square and offers 300W of heating power at 120V. For use with the Annex K3 3D Printer. It comes standard with a high temperature 3M adhesive backing. Includes integrated NTC 100k thermistor.

KB3D "MINMAX" 120V SILICONE HEATER FOR VORON V2.4 / TRIDENT - MULTIPLE STYLES
Manufactured by Keenovo, KB3D's MinMax Silicone heaters for Voron V2.4 and Trident offer full coverage heating at 120V.

Keenovo Silicone Heater - 100x100 - 100W - 24V
This silicone heater from Keenovo measures 100x100mm square and offers 100W of heating power at 24V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

Keenovo Silicone Heater - 100x100 - 100W - 120V
This silicone heater from Keenovo measures 100x100mm square and offers 100W of heating power at 120V. It comes standard with a high temperature 3m adhesive backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor.

Keenovo Silicone Heater - Creality Ender 5 Plus - 1000W - 120V
This silicone heater from Keenovo measures 370mm x 375mm and offers 1000W of heating power at 120V. It is sized for use with the Creality Ender 5 Plus or comparable build plates and comes standard with a high temperature 3m adhesive backing. Includes integrated NTC 100k thermistor.

Keenovo Silicone Heater - 250x250 - 450W - 120V - With Thermo Switch
This silicone heater from Keenovo measures 250x250mm square and offers 450W of heating power at 120V. It comes standard with a high temperature Lohmann backing for mounting to nearly any build plate. Includes integrated NTC 100k thermistor and thermostatic safety switch.

Keenovo "MinMax" 120V Silicone Heater for Micron & SaladFork 180
Meet our new MinMax silicone heaters for Micron & SaladFork!
We combined all the best features of other bed heater options while shedding the annoying "gotcha's". Specifications: 120V, 350W, Max Temperature: 135C (Short Term), 120C (Sustained). Heater lifespan is reduced at long term use over 120C. 

Unique Features:
One Size - Two Applications:
Building a Micron 180 or a SaladFork 180? Our MinMax PFA heaters are designed to fit both!

Edge to edge performance:
Uniform heating avoids the need for long heat soaks to reach a consistent temperature across the entire build plate.

Just enough room left for a high temperature RTV bead around the perimeter for high bed temperature applications.

Keenovo "MinMax" 120V Silicone Heater for Voron V2.4 / Trident
Meet our new MinMax silicone heaters for Voron V2.4 & Trident!
We combined all the best features of other bed heater options while shedding the annoying "gotcha's"

Options:
Choose your build size!

250mm (255mm Bed): 244x244 - 300W - 120V

300mm (305mm Bed): 295x295 - 500W - 120V

350mm (355mm Bed): 344x344 - 750W - 120V

Unique Features:
Symmetrical Design:
Allows the user to determine the wiring exit location. Namely for Trident builds that previously forced wires to exit the front of the machine.

Kinematic Friendly:
Generous clearance around all mounting holes and auxiliary threads means no conflict with kinematic bed mounts or alternative standoffs.

Edge to edge performance:
Uniform heating avoids the need for long heat soaks to reach a consistent temperature across the entire build plate.

Just enough room left for a high temperature RTV bead around the perimeter for high bed temperature applications.