Bondtech CHT® Coated Brass Nozzle 5 pack

$84.99

– Sold Out

Sign up for restock notifications!

These are nozzles for High Flow applications

They are manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

  • Mosquito® / Magnum
  • Mosquito® Liquid
  • Mosquito® Magnum+
  • Copperhead™
  • E3D V4, V5, and V6 blocks
  • E3D Chimera and Kraken
  • RepRap M6

Features:

  • 5 units per pack;
  • Includes the following sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mm;
  • Optimized for 1.75mm filament;
  • Compatible with 2.85mm filament.
  • Requires 6mm wrench 


Next Previous


 

 

Main Bondtech CHT® Advantages

  • Higher melt capacity by increasing the surface area of the heating walls
  • Affordable price
  • Machined with ultra-precision
  • Brass nozzle with Nickel coated surface
  • Follows nozzle standards:
    • RepRap (M6×1×7.5×12.5)
    • MK8 (M6×1×5×13)
  • May be used with 1.75 or 2.85mm hotends.

Advantages of the Bondtech CHT® technology:

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

Core Heating is a patented technology

Registration number: EP3445568A1
Nozzles for 3D printers are made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.

Advantages of the Nickel Coating

A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and a lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

Recommended Materials

Use this nozzle with the following materials:

  • PLA
  • ABS
  • HIPS
  • PC
  • TPU
  • TPE
  • Nylon
  • PETG
  • ASA
  • PP
  • PVA

For technical and abrasive materials we recommend using other nozzles.

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

Additional Resources:

Check the White Paper:

"Increasing Melt Capacity With 3 Nozzle Features"

Click here to know more about the Bondtech CHT® nozzles.

CNC Kitchen - Bondtech CHT Review