$26.99
Roto Motor (ROTO-MOTOR-AS & ROTO-MOTOR-AS-INC-CABLE)
A spare Custom E3D NEMA 14 Motor for use with the Roto Extruder. The motor comes with the pinion gear pre attached specifically for the roto gearbox and is therefore not compatible with 3rd party extruders. See technical specifications here.
WITB
Roto Motor Standalone:
1 x Roto Motor Assembly
Roto Motor with Cable:
1 x Roto Motor Assembly
1 x 1m Extension Cable
--------------------------------------------------------------------------------------------------------------------------------------
Roto Motor Cable [E-CABLE-MOTOR-ROTO-1000] A spare 1m motor cable for the Roto extruder, technical specs can be found here.
--------------------------------------------------------------------------------------------------------------------------------------
Roto Gearbox Assembly (ROTO-GEARBOX-AS)
A spare Roto gearbox assembly containing the entire planetary gear stage and plastic housing. This comes assembled and pre-greased, please do not open.
--------------------------------------------------------------------------------------------------------------------------------------
Roto Fixings Kit (M-FIX-ROTO)
All the fixings you need to mount Revo Roto to your FDM 3D Printer and replacement fixings to assemble your Roto.
X1 M-M3-12-LSHCS-A2
X1 M-M3-30-LSHCS-A2
X2 M-M3-3-SHGS-A2
X4 M-M3-12-BHCS-A2
X4 M-M4-12-BHCS-A2
X2 M-M3-35-BHCS-A2
X4 M-FIX-SELF-TAP-4-12
-------------------------------------------------------------------------------------------------------------------------------Roto HeatSink (ROTO-SINK-AS)
A spare 3D printed metal heatsink for the Roto extruder. This kit also includes the dowel pin pre-assembled. Collets and collet clips can be purchased separately.
------------------------------------------------------------------------------------------------------------------------------
Roto Heatsink Temperature Sensor kit (E-SEMITEC-MOLEX-ROTO-INC-CABLE) A spare thermistor for use with the Roto heatsink. See technical specifications here.
Please note:
This is a custom-designed temperature sensor for the Roto Heatsink, it is not compatible with V6, Volcano, or SuperVolcano sensor cartridges.
WITB:
1 x Roto Heatsink Thermistor
1 x 1m extension cable
1 M3 x 3 Grub Screw
------------------------------------------------------------------------------------------------------------------------------
Roto Filament Sensor (ROTO-FILAMENT-SENSOR)
A spare Roto Filament Sensor, including a programmable action button for custom gcode commands, includes filament sensor cable.
Please note:
This is designed specifically for the Revo extruder. We cannot guarantee compatibility with any other extruders.
-----------------------------------------------------------------------------------------------------------------------------
12/24V – 5V fan regulator board (REVO-MICRO-REG)
A spare 12/24V – 5V regulator board for the Revo Micro Fan, Roto 2 wire fan, and Roto 3 wire fan.
------------------------------------------------------------------------------------------------------------------------------
2 wire Roto Fan kit (E-FAN-35-35-7-5V-2WIRE-INC-CABLE) A spare 2 wire fan for use with the Roto extruder. See technical specifications here.
Please note: This is a 5V fan do not plug directly into a 12/24V power supply without the use of a 5V regulator board.
WITB
1 x 2 Wire Roto Fan
1 x 1m Extension Cable
------------------------------------------------------------------------------------------------------------------------------
3 wire Roto Fan Kit (E-FAN-35-35-7-5V-3WIRE-INC-CABLE) A spare 3 wire tachometer fan for use with the Roto extruder. See technical specifications here.
Please note: This is a 5V fan do not plug directly into a 12/24V power supply without the use of a 5V regulator board..
WITB
1 x 3 Wire Roto Fan
1 x 1m Extension Cable
-----------------------------------------------------------------------------------------------------------------------------
Roto Hobb & Idler kit (REVO-ROTO-HOBB-KIT)
A spare idler and hobb assembly for the roto extruder.
WITB
1 x Hobb Drive Assembly
1 x Hobb Idler Assembly
1 x Roto Idler
1 x Roto Idler Shaft
1 x Roto spring
Roto features a first of it's kind 3D printed metal heatsink, yes, you read that correctly. 3D printing gives unparalleled design freedom, which means beyond the obvious cool factor of using this technology, we have been able to highly optimise this design. Minimised wall thicknesses and skeletonised areas mean the Heatsink is as slimmed down as possible. This has not been done at the sacrifice of performance though, in fact this is the most thermally effective heatsink we have ever produced.
Ease of use was a major consideration in the design of Roto. To access the hobbs, all you need to do is remove three bolts to remove the heatsink and filament path whilst leaving the body of your extruder mounted in situ. We have also revamped the filament tensioning system, providing a simple bi-stable mechanism that provides either the optimal tension or completely releases the tension to help with filament loading and cold pulls. This means you can change the nozzle with one hand, and change the filament with one hand.
Roto's evolution doesn't stop at the base performance characteristics you're used to. Upgrade to the sensored bundle to add filament monitoring, an action button, Fan speed monitoring and heatsink temperature monitoring to your arsenal. With all of these improvements, you can implement peace of mind within your workflow with remote monitoring and quick, simple maintenance for the most hands-off 3D printing experience ever.
We are proud to be a