$64.99
In stock, ready to ship.
High-temperature cartridges for high-temperature applications.
Heaters capable of operating up to 550°C for extended periods of time. For printing high-temperature thermoplastics. Come with high amperage connectors and extension leads, the cartridge has the wires exiting at a 90° angle from the casing with a strain relief.
Voltage: 12V/24V
Power: Up to 65W Max operating temp: 550°C.
Peak current draw: 12V: 5.42A | 24V: 2.71A
WARNINGS:
- These heaters are more than capable of reaching temperatures that will soften the aluminum block shipped as standard with our heaters. These must only be used with a copper block. We also recommend coupling this with a copper nozzle, as the hardened nozzles will lose some hardness at these temperatures, and the copper will offer better thermal conductivity.
- For the 12V version, some printers' electronics are not able to withstand the current required by the heaters. If this is your case, or you don't want to risk damaging your controller board, please purchase a MOSFET switch or suitable DC-DC SSR.
