$99.00
In stock, ready to ship. Mandala Rose Works' ultraflat standard bed for the Jubilee...
$234.99
In stock, ready to ship. Documentation can be found here. The Duet 3 Mainboard 6XD...
$24.99
In stock, ready to ship. These are nozzles for High Flow applications ALERT : Avoid Cold Bondtech...
$1.50
– Sold OutIn stock, ready to ship. 245mm long, 10mm diameter Chrome Plated Hardened Rod
$2.99
In stock, ready to ship. Duet 3 to Raspberry Pi ribbon cable, as bundled with...
$2.99
In stock, ready to ship. Swap nozzles without complex tools and hot tightening with this...
$29.99
In stock, ready to ship. Spare motor for the E3D Hemera XS. Looking for a compatible toolboard?...
$164.99
In stock, ready to ship. Scroll to the bottom for variant details. As of 9/15/22,...
$37.99
In stock, ready to ship. A spare drivetrain replacement for the E3D Hemera extruder Kit...
$27.99
– Sold OutIn stock, ready to ship. PEEK 450G Recycled/Regrind Shipped in bulk packaging, no desiccant included...
$7.99
In stock, ready to ship. LGX Lite ALU Mount Plate for Mosquito Use this mount...
$24.99
In stock, ready to ship. Revo CR is a drop-in upgrade for some of the...
$25.99
In stock, ready to ship.This is a replacement heatsink for the Revo CR, no...
$44.99
In stock, ready to ship. Jubilee Sized Spring Steel Sheets, Powder-Coated PEI on one side...
$14.99
In stock, ready to ship. Swap nozzles without complex tools and hot tightening with this...
$14.99
In stock, ready to ship. Swap nozzles without complex tools and hot tightening with this...
$1,799.99
Please allow two weeks for packing/shipping. Free shipping in the continental US. Need to add...
$101.99
Documentation can be found here. The Duet 3 Expansion 1HCL is a CAN-FD connected expansion board...
$15.99
In stock, ready to ship. As shown in the photo. Documentation: ToolChanger Motion System GitHub...
$6.99
– Sold OutDescription These are the smallest NeoPixel breakouts around! Tiny, bright RGB+White pixels to your project....
$37.99
In stock, ready to ship. Comes with the updated Shaft/Gear assembly, as of 2/22/23. Original...
$3.99
In stock, ready to ship. Install your M3 threaded heat set inserts with ease and...
$29.99
In stock, ready to ship. Swap nozzles without complex tools and hot tightening with this...
$39.99
In stock, ready to ship. Wiring harness as used in Jubilee kits. Does not include SSR, AC...
$54.99
– Sold OutNo plans to restock, sign up to be notified if you're interested. The Sherpa Mini...
$74.99
In stock, ready to ship. Explore Revo™ Hemera from E3D, a powerful dual-drive extrusion system....
$0.99
In stock, ready to ship. Swap nozzles without complex tools and hot tightening with this...
$27.99
In stock, ready to ship. Swap nozzles without complex tools and hot tightening with this...
$27.99
In stock, ready to ship. For use as a spare part with E3D's Rapid...
$6.99 $7.99
In stock, ready to ship. Swap nozzles without complex tools and hot tightening with this...
$2.99
In stock, ready to ship. Swap nozzles without complex tools and hot tightening with this...
$27.99
In stock, ready to ship. As of 9/15/22, comes with new/improved heatercore (with blue...
$1.49 $2.99
In stock, ready to ship. 640mm long, 4.6 mm wide, 0.2mm thick. We are proud to...
$19.99 $24.99
In stock, ready to ship. Discover E3D's Revo Nozzles for your 3D printing extrusion system,...
$174.99
In stock, ready to ship. As of 9/15/22, comes with new/improved heatercore (with blue thermistor...
$14.99
In stock, ready to ship. Connects to the 10 pin temperature sensor header, 500mm cable....
$10.49
In stock, ready to ship. At long last, from Slice Engineering, there is an official...
$4.99
In stock, ready to ship. Cable for connecting two CAN-FD devices, like a Duet 3 6HC and...
$14.99
In stock, ready to ship. Genuine Delta fan, from authorized distributor. Voltage - Rated24VDCSize /...
$1.99
– Sold OutIn stock, ready to ship. Conventional relay, not solid state. 24v coil, contacts rated for...
$29.99
SDSQXAH-064G-GN6MN Sandisk Extreme 64GB Micro SDXC Class 10 Performance For Full HD Video 1080p and...
$20.99
In stock, ready to ship. This is an industrial heater, rated for high operating temperatures...
$69.99
In stock, ready to ship. Comes with the updated Shaft/Gear assembly, as of 2/22/23. New Bondtech Internal Filament Sensor...
$99.99
In stock, ready to ship. The Bondtech DDX Direct Drive eXtruder for Creality 3D printers...
$19.99
In stock, ready to ship. These are nozzles for High Flow applications ALERT : Avoid Cold Bondtech...
$20.99
In stock, ready to ship. Keep your filament dry with the Filament Drying Desiccant from...
$0.49
From Left to Right: "1.75 Mini MK8":5mm ID9mm OD11mm Overall Length "3mm":5mm ID12.5mm OD11mm Overall...
$3.99 $6.99
In stock, ready to ship. Compatible with all MK2 and MK3 based Prusa printers.
$8.49
– Sold OutIn stock, ready to ship. Specification:Supply voltage: 5V DCCurrent rating: 0.30ARotational speed: 5000rpmFlow rate: 4.4...
$2.99
– Sold OutHeatsink designed for NEMA 17 stepper motors, but you could use it on anything you'd...
