In stock, ready to ship.
High temperature cartridges for high temperature applications.
Heaters capable of operating up to 550°C for extended periods of time. For printing high temperature thermoplastics. Come with high ampage connectors and extension leads, the cartridge has the wires exiting at a 90° angle from the casing with a strain relief.
Power: Up to 65W Max operating temp: 550°C.
Peak current draw: 12V: 5.42A | 24V: 2.71A
- These heaters are more than capable of reaching temperatures that will soften the aluminium block shipped as standard with our heaters. These must only be used with a copper block. We also recommend coupling this with a copper nozzle, as the hardened nozzles will lose some hardness at these temperatures, and the copper will offer better thermal conductivity.
- For the 12V version, some printers' electronics are not able to withstand the current required by the heaters. If this is your case, or you don't want to risk damaging your controller board board, please purchase a MOSFET switch or suitable DC-DC SSR.
In stock, ready to ship, except 304mm, ETA early June. 12 Magballs and 6 Arms...
In stock, ready to ship. 24v Kapton Heater - 200mm x 250mm Size: 200mm x...
In stock, ready to ship. Pack of 3 three fuses that come with a Duet...
In stock, ready to ship. This is a 5V plug in regulator module in the...