{"product_id":"ldo-voron-trident-300-cube-3d-printer-build-kit-rev-d","title":"LDO Voron Trident 300 Cube 3D Printer Kit (Rev. D)","description":"\u003ch1 style=\"margin: 0 0 25px;\"\u003eLDO Voron Trident 300 Cube Kit (Rev. D)\u003c\/h1\u003e\n\u003cp\u003eThe Voron Trident is an open source CoreXY 3D printer with a fixed gantry and a bed carried on three independently driven leadscrews. The chamber is fully enclosed and the bed reaches 110 °C. LDO builds the Cube kit at 300mm in all three axes rather than the standard 250mm Z height from the original bill of materials.\u003c\/p\u003e\n\u003cp\u003eRev. D is the latest revision, and it addresses the steps that often delay first time builders. The looms arrive cut and crimped, the toolhead runs on a single USB cable, and the touchscreen, chamber lighting, stainless rails, and hardware for two common mods are already in the box.\u003c\/p\u003e\n\u003c!-- Responsive 16:9 video wrapper --\u003e\n\u003cdiv style=\"position: relative; width: 100%; padding-bottom: 56.25%; height: 0; margin: 25px 0 0; border-radius: 8px; overflow: hidden;\"\u003e\u003ciframe style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;\" src=\"https:\/\/www.youtube.com\/embed\/UU5z1If52DU\" title=\"LDO Voron Trident build review by Gearhead Creations\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp style=\"margin-top: 12px; opacity: 0.7; font-size: 0.9rem;text-align:center;\"\u003eGearhead Creations 5 minute review on the LDO Trident kit covers the pros, cons and if you should buy it.\u003c\/p\u003e\n\u003c!-- Key figures strip --\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; border: 1px solid rgba(127,127,127,0.22); border-radius: 10px; margin-top: 25px; overflow: hidden;\"\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 200px; padding: 22px; text-align: center; border-right: 1px solid rgba(127,127,127,0.22);\"\u003e\n\u003cdiv style=\"font-size: 1.35rem; font-weight: bold; line-height: 1.2;\"\u003e300×300×300 mm\u003c\/div\u003e\n\u003cdiv style=\"font-size: 0.85rem; opacity: 0.7; margin-top: 6px;\"\u003e27 liters, enclosed\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 200px; padding: 22px; text-align: center; border-right: 1px solid rgba(127,127,127,0.22);\"\u003e\n\u003cdiv style=\"font-size: 1.35rem; font-weight: bold; line-height: 1.2;\"\u003e300 mm\/s\u003c\/div\u003e\n\u003cdiv style=\"font-size: 0.85rem; opacity: 0.7; margin-top: 6px;\"\u003e15,000 mm\/s² acceleration\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 200px; padding: 22px; text-align: center; border-right: 1px solid rgba(127,127,127,0.22);\"\u003e\n\u003cdiv style=\"font-size: 1.35rem; font-weight: bold; line-height: 1.2;\"\u003e110 °C bed\u003c\/div\u003e\n\u003cdiv style=\"font-size: 0.85rem; opacity: 0.7; margin-top: 6px;\"\u003e500 W AC heater, cast plate\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 200px; padding: 22px; text-align: center;\"\u003e\n\u003cdiv style=\"font-size: 1.35rem; font-weight: bold; line-height: 1.2;\"\u003eKlipper\u003c\/div\u003e\n\u003cdiv style=\"font-size: 0.85rem; opacity: 0.7; margin-top: 6px;\"\u003eLeviathan board, config published\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003e300 mm in Every Axis\u003c\/h2\u003e\n\u003cp\u003eEvery Trident built to the official BOM stops at 250 mm in Z, regardless of which XY size is picked.\u003c\/p\u003e\n\u003cp\u003eLDO extends the Z on the 300 mm variant to match the footprint. Frame extrusions, linear rails, and panels are all cut and specified for the taller frame, so the assembly follows the standard manual step for step with no substitutions and no improvised parts. There is one size and one configuration to order.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/kb-3d.com\/store\/media\/webp\/ldo\/voron\/trident\/featured.webp\" alt=\"LDO Voron Trident 300 Cube CoreXY 3D printer kit\" loading=\"lazy\" style=\"display: block; width: 100%; height: auto; margin-top: 25px; border-radius: 8px;\"\u003e\u003c\/p\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003eFixed Gantry, Moving Bed\u003c\/h2\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 30px; align-items: center;\"\u003e\n\u003cdiv style=\"flex: 3 1 320px;\"\u003e\n\u003cp style=\"margin: 0 0 12px;\"\u003eCoreXY bolts both motors to the frame and drives the toolhead through crossed belt loops, keeping moving mass low enough to hold accuracy at speed. The Trident takes that layout and fixes the gantry in place permanently.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 12px;\"\u003eThe bed does the work in Z instead, riding on three leadscrews with a stepper on each. Klipper probes the plate, drives the screws independently until it sits parallel with the gantry, and repeats the routine at the start of the next print. The whole routine is a G-code macro, so it happens without anyone touching the machine.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eLeadscrews also hold their position when the power is off, so a Trident tends to stay in tune between builds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex: 2 1 260px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/files\/ldo_voron_trident_cad_3_axis_430x.webp\" alt=\"Voron Trident triple leadscrew Z drive\" loading=\"lazy\" style=\"display: block; width: 100%; height: auto; border-radius: 8px;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003eVoron Trident vs. Voron 2.4\u003c\/h2\u003e\n\u003cp\u003eThe two enclosed Vorons share their CoreXY motion, the Stealthburner toolhead, and the Klipper ecosystem. The Z axis is the difference.\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto; margin-top: 25px;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"padding: 12px; text-align: left; border-bottom: 2px solid rgba(127,127,127,0.35);\"\u003e \u003c\/th\u003e\n\u003cth style=\"padding: 12px; text-align: left; border-bottom: 2px solid rgba(127,127,127,0.35);\"\u003eVoron Trident\u003c\/th\u003e\n\u003cth style=\"padding: 12px; text-align: left; border-bottom: 2px solid rgba(127,127,127,0.35);\"\u003eVoron 2.4\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eZ Motion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eBed moves on three leadscrews, gantry bolted to the frame\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eBed is fixed, gantry hangs from four belted Z motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eLeveling Routine\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eZ tilt adjust, three points\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eQuad gantry leveling, four points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eBuild Difficulty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eFewer parts in the Z assembly, shorter build, forgiving of small errors\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eGantry squaring and belt tension take patience to get right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eOngoing Calibration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eLeadscrews hold position, drift is rare\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eBelted gantry wants periodic attention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px;\"\u003e\u003cstrong\u003eTrade-off\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px;\"\u003eBed mass moves, so very tall builds get impractical\u003c\/td\u003e\n\u003ctd style=\"padding: 12px;\"\u003eScales to taller frames without moving the bed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"margin-top: 25px;\"\u003eFor a first Voron, the Trident is often the better choice. A Voron 2.4 will punish a sloppy gantry build for as long as you own it, while a Trident with the same errors will still print. At 300 mm of Z, the Trident Cube also covers a big reason that many builders go 2.4 in the first place.\u003c\/p\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003eSelf-Source vs. LDO Rev. D Kit\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x: auto; margin-top: 25px;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"padding: 12px; text-align: left; border-bottom: 2px solid rgba(127,127,127,0.35);\"\u003e \u003c\/th\u003e\n\u003cth style=\"padding: 12px; text-align: left; border-bottom: 2px solid rgba(127,127,127,0.35);\"\u003eSelf-source\u003c\/th\u003e\n\u003cth style=\"padding: 12px; text-align: left; border-bottom: 2px solid rgba(127,127,127,0.35);\"\u003eLDO Rev. D Kit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eMeasure, cut, and crimp every loom yourself\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003ePre-cut and pre-terminated, with a published routing guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eToolhead Wiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eFull loom through the drag chain to the mainboard\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eNitehawk-SB PCB on one USB cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eLinear Rails\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eQuality varies by supplier, carbon steel is common\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eLDO MGN12H and MGN9H in stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eCut and tap extrusion, or pay a shop to do it\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e2020 extrusion arrives cut and tapped to length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eOptional extra, sourced separately\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e4.3 in capacitive DSI touchscreen with KlipperScreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eChamber Lighting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eA later project\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eTwo 35 cm COB LED strips with a printed diffuser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px;\"\u003e\u003cstrong\u003eCommon Mods\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px;\"\u003eA second order once the machine runs\u003c\/td\u003e\n\u003ctd style=\"padding: 12px;\"\u003eNevermore Micro V5 and Klicky hardware included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003eEverything in the Box\u003c\/h2\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 20px;\"\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 calc(50% - 10px); min-width: 260px; border: 1px solid rgba(127,127,127,0.22); border-radius: 10px; padding: 24px;\"\u003e\n\u003ch3 style=\"margin: 0 0 10px;\"\u003eFrame and Motion\u003c\/h3\u003e\n\u003cp style=\"margin: 0;\"\u003e2020 aluminum extrusion, pre-cut and pre-tapped. LDO stainless MGN12H and MGN9H rails at 350 mm. Gates 2GT 6 mm belts. LDO 42STH48 motors on A and B, 42STH40 on the three Z screws, 36STH20 driving the extruder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 calc(50% - 10px); min-width: 260px; border: 1px solid rgba(127,127,127,0.22); border-radius: 10px; padding: 24px;\"\u003e\n\u003ch3 style=\"margin: 0 0 10px;\"\u003eElectronics and Control\u003c\/h3\u003e\n\u003cp style=\"margin: 0;\"\u003eLDO Leviathan V1.3 mainboard carrying five TMC2209 and two TMC5160 drivers. Nitehawk-SB USB toolboard. 4.3 in KlipperScreen touchscreen. Meanwell LRS-200-24 supply, integrated AC inlet with switch and fuse, Omron solid state relay.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 calc(50% - 10px); min-width: 260px; border: 1px solid rgba(127,127,127,0.22); border-radius: 10px; padding: 24px;\"\u003e\n\u003ch3 style=\"margin: 0 0 10px;\"\u003eToolhead and Cooling\u003c\/h3\u003e\n\u003cp style=\"margin: 0;\"\u003eStealthburner with the Clockwork 2 extruder and Bondtech IDGA dual-drive gears. E3D Revo hotend in high flow trim, good to 300 °C with nozzle changes by hand. A 5015 blower for part cooling, a 4010 on the heatsink, two 6020 fans in the chamber, and the Nevermore Micro V5 filtration parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 calc(50% - 10px); min-width: 260px; border: 1px solid rgba(127,127,127,0.22); border-radius: 10px; padding: 24px;\"\u003e\n\u003ch3 style=\"margin: 0 0 10px;\"\u003eBed and Enclosure\u003c\/h3\u003e\n\u003cp style=\"margin: 0;\"\u003eCast 5083 aluminum plate, Blanchard ground, 305 × 305 × 10 mm. LDO AC silicone heater with a 125 °C thermal fuse. PEI spring steel on a magnetic pad. Black acrylic deck, back, and bottom, with clear acrylic doors, sides, and top.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003eBefore You Order\u003c\/h2\u003e\n\u003cdiv style=\"background: rgba(127,127,127,0.08); border: 1px solid rgba(127,127,127,0.22); border-radius: 12px; padding: 30px;\"\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 30px; align-items: center;\"\u003e\n\u003cdiv style=\"flex: 1 1 300px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/files\/ldo_voron_trident_printed_parts.webp\" alt=\"Voron Trident printed parts kit in ABS\" loading=\"lazy\" style=\"display: block; width: 100%; height: auto; border-radius: 8px;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 320px;\"\u003e\n\u003ch3 style=\"margin: 0 0 12px;\"\u003ePrinted Parts Not Included\u003c\/h3\u003e\n\u003cp style=\"margin: 0 0 12px;\"\u003eA Trident needs a full set of printed parts, in ABS or ASA, since the chamber runs too hot for PLA to survive. LDO includes the kit-specific prints such as the Leviathan brackets, Nitehawk adapter, cable anchors, and LED diffuser, and publishes a \u003ca href=\"https:\/\/docs.ldomotors.com\/en\/voron\/voron-trident\/printed_part_guide_rev_d\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePrinted Parts Guide\u003c\/a\u003e covering settings and a checklist for the rest.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eWith a working printer, start those files the day you order so they are done when the kit lands. Without one, our made-to-order \u003ca href=\"https:\/\/kb-3d.com\/store\/v1-trident\/551-voron-trident-printed-parts-kit-configurable-1646853935497.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVoron Trident Printed Parts Kit\u003c\/a\u003e from Bounty3D comes in Fusion Filaments ABS, black with your choice of accent color, dimensionally accurate and set up for generic or IGUS cable chains. It covers the functional set that gets the machine running. Skirts, hinges, and the cosmetic parts come off the finished Trident later.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 16px; margin-top: 20px;\"\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 calc(33.333% - 11px); min-width: 240px; border: 1px solid rgba(127,127,127,0.22); border-radius: 8px; padding: 24px;\"\u003e\n\u003ch3 style=\"margin-top: 0;\"\u003eRaspberry Pi 4B\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 0;\"\u003eThe Raspberry Pi is not included by default and must be sourced separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 calc(33.333% - 11px); min-width: 240px; border: 1px solid rgba(127,127,127,0.22); border-radius: 8px; padding: 24px;\"\u003e\n\u003ch3 style=\"margin-top: 0;\"\u003eFilament\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 0;\"\u003eAround 1.5 kg of ABS or ASA covers a full set of printed parts for the Voron Trident build.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"box-sizing: border-box; flex: 1 1 calc(33.333% - 11px); min-width: 240px; border: 1px solid rgba(127,127,127,0.22); border-radius: 8px; padding: 24px;\"\u003e\n\u003ch3 style=\"margin-top: 0;\"\u003eA Soldering Iron\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 0;\"\u003eThere are 96 brass heatset inserts to melt into the printed parts. LDO supplies the insert tip, hex wrenches, and a driver, so you need your own iron and a pair of side cutters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003eBuild Resources\u003c\/h2\u003e\n\u003cp\u003eThe official Voron manual drives the mechanical assembly, and LDO's build notes accompany it, marking the steps that change because of what's included. The wiring guide covers the pre-terminated looms and the Leviathan pinout.\u003c\/p\u003e\n\u003cp\u003eOnce Klipper is talking to the board, print the Voron design cube first. It exercises extrusion, temperature control, motion, and dimensional accuracy in one small part, and it will tell you quickly what, if anything needs tuning. LDO recommends OrcaSlicer, which ships with Voron profiles ready to go.\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto; margin-top: 25px;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22); vertical-align: top;\"\u003e\n\u003ca href=\"https:\/\/docs.ldomotors.com\/en\/voron\/voron-trident\/300CUBE_BOM\/Rev_D\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTrident 300 Cube Spec Kit BOM (Rev. D)\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"opacity: 0.7;\"\u003eThe full parts list. Check it against your shipment before you start.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22); vertical-align: top;\"\u003e\n\u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-Trident\/blob\/master\/Manual\/Assembly_Manual_Trident.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOfficial Voron Assembly Manual (PDF)\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"opacity: 0.7;\"\u003eThe primary build document, read together with the LDO notes below.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22); vertical-align: top;\"\u003e\n\u003ca href=\"https:\/\/docs.ldomotors.com\/en\/voron\/voron-trident\/build-faq\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLDO Trident Build Notes\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"opacity: 0.7;\"\u003eWhich manual steps to skip, change, or read twice for this kit.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22); vertical-align: top;\"\u003e\n\u003ca href=\"https:\/\/docs.ldomotors.com\/en\/voron\/voron-trident\/wiring_guide_rev_d\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLDO Trident Wiring Guide (Rev. D)\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"opacity: 0.7;\"\u003ePre-terminated looms, routing, and the Leviathan board layout.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; vertical-align: top;\"\u003e\n\u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-2\/tree\/Voron2.4\/STLs\/Test_Prints\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVoron Test Print STLs\u003c\/a\u003e and \u003ca href=\"https:\/\/orcaslicer.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOrcaSlicer\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"opacity: 0.7;\"\u003eFirst prints and the slicer LDO recommends, Voron profiles included.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003eOpen Source, End to End\u003c\/h2\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 30px; align-items: center;\"\u003e\n\u003cdiv style=\"flex: 2 1 260px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/files\/ldo_voron_trident_cad_render_430x.webp\" alt=\"CAD model of the Voron Trident 300 Cube\" loading=\"lazy\" style=\"display: block; width: 100%; height: auto; border-radius: 8px;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex: 3 1 320px;\"\u003e\n\u003cp style=\"margin: 0 0 12px;\"\u003eThe Trident is an official Voron Design release under GPL-3.0. Source CAD, STLs, and the assembly manual are public on \u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-Trident\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGitHub\u003c\/a\u003e, with years of community testing and documentation behind them.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 12px;\"\u003eRunning Klipper means every macro, web interface, and tuning workflow from the wider Voron world applies here directly, and LDO publishes the printer configuration for this kit.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eNothing is vendor locked. Every component can be sourced online.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"margin: 100px 0 25px;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"padding: 12px; background: rgba(127,127,127,0.14); font-weight: bold; text-transform: uppercase; letter-spacing: 0.05em;\"\u003eMeasurements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22); width: 40%;\"\u003e\u003cstrong\u003eBuild Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e300 × 300 × 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003ePrinter Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eApprox. 460 × 460 × 550 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e2020 aluminum extrusion, pre-cut and pre-tapped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eFilament Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"padding: 12px; background: rgba(127,127,127,0.14); font-weight: bold; text-transform: uppercase; letter-spacing: 0.05em;\"\u003eMotion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eMotion System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eCoreXY, fixed gantry with triple leadscrew Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eLinear Rails\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eLDO stainless steel, one MGN12H and five MGN9H, all 350 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eBelts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eGates 2GT, 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eMotors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eLDO 42STH48 (A\/B), 42STH40 (Z), 36STH20 (extruder)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eMax Speed and Acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e300 mm\/s at 15,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"padding: 12px; background: rgba(127,127,127,0.14); font-weight: bold; text-transform: uppercase; letter-spacing: 0.05em;\"\u003eToolhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eExtruder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eStealthburner with Clockwork 2 (Bondtech IDGA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eE3D Revo, high flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eToolboard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eLDO Nitehawk-SB USB toolboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eMax Nozzle Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e300 °C \/ 572 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"padding: 12px; background: rgba(127,127,127,0.14); font-weight: bold; text-transform: uppercase; letter-spacing: 0.05em;\"\u003eBed and Print Surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eHeated Bed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eCast 5083 aluminum plate, 305 × 305 × 10 mm, with 500 W AC silicone heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003ePrint Surface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003ePEI spring steel on a magnetic pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eMax Bed Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e110 °C \/ 230 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eBed Leveling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eKlicky probe kit with Klipper Z tilt adjust across three leadscrews\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"padding: 12px; background: rgba(127,127,127,0.14); font-weight: bold; text-transform: uppercase; letter-spacing: 0.05em;\"\u003eElectronics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eMainboard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eLDO Leviathan V1.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eStepper Drivers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e5 × TMC2209 and 2 × TMC5160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eHost\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eRaspberry Pi 4B with 32 GB SD card. Raspberry Pi not included by default, add one above if needed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e4.3 in capacitive touchscreen running KlipperScreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eFirmware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eKlipper, with the LDO configuration published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eEthernet, Wi-Fi, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eTemperature Sensors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e104NT thermistors on bed, chamber, and hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eLighting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eCOB LED, 2 × 35 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"padding: 12px; background: rgba(127,127,127,0.14); font-weight: bold; text-transform: uppercase; letter-spacing: 0.05em;\"\u003eCooling, Power and Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eFans\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e4010 and 5015 on the toolhead, 2 × 6020 in the chamber, all 24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eFiltration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eNevermore Micro V5 parts included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eMeanwell LRS-200-24 (24 V, 200 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003eAC Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eIntegrated inlet with switch and fuse, Omron solid state relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003e\u003cstrong\u003ePanels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px; border-bottom: 1px solid rgba(127,127,127,0.22);\"\u003eAcrylic, black deck, back and bottom, clear doors, sides and top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 12px;\"\u003e\u003cstrong\u003ePrinted Parts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 12px;\"\u003eNot included, self-printed or purchased separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c!-- spacer --\u003e\n\u003cdiv style=\"height: 100px;\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"LDO","offers":[{"title":"Black","offer_id":43153308155975,"sku":"LDO-VTD-300CB-BLK","price":1249.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":43153308188743,"sku":"LDO-VTD-300CB-GRY","price":1249.99,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":43153308221511,"sku":"LDO-VTD-300CB-BLU","price":1249.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/files\/ldo_voron_trident_revd_1.webp?v=1788263070","url":"https:\/\/www.filastruder.com\/products\/ldo-voron-trident-300-cube-3d-printer-build-kit-rev-d","provider":"Filastruder","version":"1.0","type":"link"}