E3D Titan Aero Prusa i3 Upgrade Kit

Type

Everything you need to upgrade your Prusa i3 or i3-style 3D printer with E3D's Titan Aero

Titan Aero integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own. For a complete breakdown of what makes Aero special (plus a behind-the-scenes look at the development process), check out E3D's blog post.



This upgrade kit is intended for use with a generic I3 (see requirements below). It is not suitable for use with the original I3 Mk2 / Mk2S or Mk3 as it does not have any means of attaching the PINDA sensor. If you would like to use a Titan Aero on your I3 Mk2 or Mk2S E3D has an upgrade you can find here"

This kit does not include a stepper motor. If you would like one, they are available here:

Please note:

Requirements are that your machine has:

  • 8mm Rods using LM8UU Bearings (or similar).
  • 45mm Rod Spacing, ~15mm Belt Spacing.
  • One bearing on the top rod, two on the bottom, or the other way around.

Due to the sensor placement on i3 3D printers, this build does not offer the usual increase in Z-height associated with a Titan Aero upgrade.

The mounting bracket for this upgrade is similar in design to that of the standard V6-i3 upgrade kit. However they are NOT interchangeable.

Related Items