Nema17 12N-cm stepper motor with 16.5mm D shaft for grub screw and 0.4m wiring.
These stepper motors are smaller NEMA17 Stepper Motors for use on your extruder or printer axes. Weighing only 130g but still producing 12N-cm of torque these motors make an excellent choice for use on a Titan extruder if the Titan is to be used with 1.75mm filament. Lighter and shorter than the standard motors, but producing plenty of torque after the 3:1 ratio of the Titan.
The body of the 12N-cm motor is 24mm long (22mm not counting the protrusion around the motor shaft), and the shaft is 16.5mm long.
Note that the shaft length is on the shorter side. It should be OK with Titan mounts that have 2mm or less of thickness. For thicker mounting solutions, you will want to consider a motor with a longer shaft.
|Holding Torque||12 N-cm|
In stock, ready to ship. Note: The Duex4 is not compatible with the Duet Wifi....
In Stock, ready to ship. Note: The Duex4 is not compatible with the Duet Ethernet....
Duex2 out of stock, ETA mid June. Duex5 is in stock. Note: The Duex2/5 are compatible with the...
In stock, ready to ship. PT100 daughterboard - Plugs into the Duet Wifi, allowing...