{"title":"CHT","description":"","products":[{"product_id":"bondtech-cht-coated-brass-nozzle-1-75","title":"Bondtech CHT™ Coated Brass Nozzle - Various Types \u0026 Sizes","description":"\u003cp\u003e\u003cstrong\u003eIn stock, ready to ship.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eThese are nozzles for\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eHigh Flow\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eapplications\u003c\/h3\u003e\n\u003ch4\u003eALERT : Avoid Cold Bondtech CHT Nozzles Change\u003c\/h4\u003e\n\u003cp\u003eHeat up the heat block up tp 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. \u003cb\u003eUse at most 1.5 Nm torque\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThey are\u003cspan\u003e \u003c\/span\u003e\u003cb\u003emanufactured by Bondtech in-house\u003c\/b\u003e,\u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch3\u003eRepRap Fits:\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMosquito and Mosquito Magnum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMosquito Liquid\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMosquito Magnum+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCopperhead\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eE3D V4, V5 and V6 blocks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eE3D Chimera and Kraken\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRepRap M6\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eMK8 Fits:\u003csmall\u003e\u003c\/small\u003e\n\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ebq Hephestos\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHephestos 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ebq Prusa i3 Hephestos\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ebq Witbox\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ebq Witbox 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality CR-10\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality CR-10-S4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality CR-10-S5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality CR-10S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMakerBot Replicator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMakerBot Replicator 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMakerBot Replicator 2X\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality Ender 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality Ender 3 Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality CR-20 Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality Ender 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCraftbot family\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality CR-10 V2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality CR-6 SE\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreality CR-10 Smart\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTevo Tornado\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-single__description rte\"\u003e\n\u003cdiv aria-labelledby=\"tab-title-description\" role=\"tabpanel\" id=\"tab-description\" class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content active\"\u003e\n\u003ch4\u003eCreality CSP fits:\u003c\/h4\u003e\n\u003ch4\u003eThe Creality Spider hotend may be used on the following Creality 3D printer models:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnder-3 \/ Ender-3 Max \/ Ender-3 Pro \/ Ender-3 V2\u003c\/li\u003e\n\u003cli\u003eEnder-5 \/ Ender-5 Plus \/ Ender-5 Pro\u003c\/li\u003e\n\u003cli\u003eEnder-6\u003c\/li\u003e\n\u003cli\u003eEnder-7\u003c\/li\u003e\n\u003cli\u003eCR-10 series\u003c\/li\u003e\n\u003cli\u003eCR-10S series\u003c\/li\u003e\n\u003cli\u003eCR-20 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eElegoo Fits:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNeptune 4 Plus\u003c\/li\u003e\n\u003cli\u003eNeptune 4 Max\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFIN Fits:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNext Generation Nozzle Standard found on many of the latest hot ends!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMain Advantages\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eHigher melt capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAffordable price\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMachined with ultra-precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBrass nozzle with Nickel coated surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFollows the RepRap standard (M6×1×7.5×12.5 1.75)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT Nozzle technology:\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eBondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eA Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003csection id=\"section_1409879136\" class=\"section\"\u003e\n\u003cdiv class=\"bg section-bg fill bg-fill bg-loaded\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-2131808038\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-353166593\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch4\u003eRecommended Materials\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eUse this nozzle with the following materials:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eABS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHIPS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPE\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePETG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eASA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePVA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-1712565368\" class=\"row row-collapse align-middle\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1599569422\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cp\u003e\u003cb\u003eFor technical and abrasive materials we recommend to use other nozzles in our range.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003ch4\u003eDifferent nozzle sets for different materials\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eWe recommend you to have several sets of nozzles because:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUsing different materials with the same nozzles causes deposit build-up inside the nozzle.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThese deposits will cause blockages.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe recommend changing nozzles when changing materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection id=\"section_5237777\" class=\"section\"\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-1369719879\" class=\"row row-collapse align-middle\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1282118927\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cstrong\u003eMore Information:\u003cbr\u003e\u003c\/strong\u003eWatch this \u003ca href=\"https:\/\/www.youtube.com\/watch?v=MfmNLdmHa7U\"\u003evideo\u003c\/a\u003e to learn more.\u003cbr\u003eRead \u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\"\u003eWhite Paper\u003c\/a\u003e. \u003c\/div\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eCNC Kitchen - \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\"\u003eBondtech CHT Review\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Bondtech","offers":[{"title":"RepRap\/E3Dv6 \/ 0.25mm","offer_id":41352953364551,"sku":"600-C-CHT-MOS-175-25","price":19.99,"currency_code":"USD","in_stock":true},{"title":"RepRap\/E3Dv6 \/ 0.4mm","offer_id":39515170799687,"sku":"600-C-CHT-MOS-175-40","price":19.99,"currency_code":"USD","in_stock":true},{"title":"RepRap\/E3Dv6 \/ 0.5mm","offer_id":39598895562823,"sku":"600-C-CHT-MOS-175-50","price":19.99,"currency_code":"USD","in_stock":true},{"title":"RepRap\/E3Dv6 \/ 0.6mm","offer_id":39477007122503,"sku":"600-C-CHT-MOS-175-60","price":19.99,"currency_code":"USD","in_stock":true},{"title":"RepRap\/E3Dv6 \/ 0.8mm","offer_id":39477007155271,"sku":"600-C-CHT-MOS-175-80","price":19.99,"currency_code":"USD","in_stock":true},{"title":"RepRap\/E3Dv6 \/ 1.0mm","offer_id":39477007188039,"sku":"600-C-CHT-MOS-175-10","price":19.99,"currency_code":"USD","in_stock":true},{"title":"RepRap\/E3Dv6 \/ 1.4mm","offer_id":39477007220807,"sku":"600-C-CHT-MOS-175-14","price":19.99,"currency_code":"USD","in_stock":true},{"title":"RepRap\/E3Dv6 \/ 1.8mm","offer_id":39477007253575,"sku":"600-C-CHT-MOS-175-18","price":19.99,"currency_code":"USD","in_stock":true},{"title":"MK8 \/ 0.4mm","offer_id":42389505704007,"sku":"600-C-CHT-MK8-175-40","price":19.99,"currency_code":"USD","in_stock":true},{"title":"MK8 \/ 0.6mm","offer_id":42389505769543,"sku":"600-C-CHT-MK8-175-60","price":19.99,"currency_code":"USD","in_stock":true},{"title":"MK8 \/ 0.8mm","offer_id":42389505802311,"sku":"600-C-CHT-MK8-175-80","price":19.99,"currency_code":"USD","in_stock":true},{"title":"MK8 \/ 1.0mm","offer_id":42389505835079,"sku":"600-C-CHT-MK8-175-10","price":19.99,"currency_code":"USD","in_stock":true},{"title":"MK8 \/ 1.4mm","offer_id":42389505867847,"sku":"600-C-CHT-MK8-175-14","price":19.99,"currency_code":"USD","in_stock":true},{"title":"MK8 \/ 1.8mm","offer_id":42389505900615,"sku":"600-C-CHT-MK8-175-18","price":19.99,"currency_code":"USD","in_stock":true},{"title":"FIN \/ 0.2mm","offer_id":42389505966151,"sku":"NOZ01CHT41490","price":24.99,"currency_code":"USD","in_stock":true},{"title":"FIN \/ 0.4mm","offer_id":42389506031687,"sku":"NOZ01CHT41462","price":24.99,"currency_code":"USD","in_stock":true},{"title":"FIN \/ 0.6mm","offer_id":42389506097223,"sku":"NOZ01CHT41468","price":24.99,"currency_code":"USD","in_stock":true},{"title":"FIN \/ 0.8mm","offer_id":42389506129991,"sku":"NOZ01CHT41471","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Elegoo \/ 0.4mm","offer_id":42389506359367,"sku":"NOZ01CHT41222","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Elegoo \/ 0.5mm","offer_id":42389506392135,"sku":"NOZ01CHT41223","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Elegoo \/ 0.6mm","offer_id":42389506424903,"sku":"NOZ01CHT41228","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Elegoo \/ 0.8mm","offer_id":42389506457671,"sku":"NOZ01CHT41244","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Elegoo \/ 1.0mm","offer_id":42389506490439,"sku":"NOZ01CHT41245","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Elegoo \/ 1.8mm","offer_id":42389506555975,"sku":"NOZ01CHT41250","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Elegoo \/ 2.5mm","offer_id":42389506588743,"sku":"NOZ01CHT41734","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Creality Spider \/ 0.4mm","offer_id":42389506687047,"sku":"600-C-CHT-CSP-175-40","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Creality Spider \/ 0.6mm","offer_id":42389506752583,"sku":"600-C-CHT-CSP-175-60","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Creality Spider \/ 0.8mm","offer_id":42389506785351,"sku":"600-C-CHT-CSP-175-80","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Creality Spider \/ 1.0mm","offer_id":42389506818119,"sku":"600-C-CHT-CSP-175-10","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/products\/6.png?v=1643316592"},{"product_id":"bondtech-cht-coated-brass-nozzle-volcano-compatible","title":"Bondtech CHT™ Coated Brass Nozzle (Volcano Compatible)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIn stock, ready to ship.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eThese are nozzles for\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eHigh Flow\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eapplications\u003c\/h3\u003e\n\u003ch4\u003eALERT : Avoid Cold Bondtech CHT Nozzles Change\u003c\/h4\u003e\n\u003cp\u003eHeat up the heat block up to 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. \u003cb\u003eUse at most 1.5 Nm torque\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003emanufactured by Bondtech in-house\u003c\/b\u003e, and will fit the following hotends\/blocks:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eE3D Volcano blocks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOther Volcano type blocks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eArtillery Sidewinder X1 and X2\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnycubic Vyper\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFLSUN Super Racer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eArtillery Genius Pro\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnycubic Kobra and Kobra Max\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLulzbot TAZ MOARstruder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMain Advantages\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigher melt capacity\u003c\/li\u003e\n\u003cli\u003eAffordable price\u003c\/li\u003e\n\u003cli\u003eMachined with ultra-precision\u003c\/li\u003e\n\u003cli\u003eBrass nozzle with Nickel coated surface\u003c\/li\u003e\n\u003cli\u003eOptimized for 1.75mm, compatible with 2.85\/3.0mm filament \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT™ technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA nickel coating is applied to the coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003csection id=\"section_5237777\" class=\"section\"\u003e\n\u003cdiv class=\"bg section-bg fill bg-fill bg-loaded\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-657341818\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-539396149\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch4\u003eRecommendations:\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eUse this nozzle with the following materials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003eHIPS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003eTPU\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003eNylon\u003c\/li\u003e\n\u003cli\u003ePETG\u003c\/li\u003e\n\u003cli\u003eASA\u003c\/li\u003e\n\u003cli\u003ePP\u003c\/li\u003e\n\u003cli\u003ePVA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-1369719879\" class=\"row row-collapse align-middle\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1282118927\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cp\u003e\u003cb\u003eFor technical and abrasive materials, use other nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMore Information:\u003cbr\u003e\u003c\/strong\u003eWatch this \u003ca href=\"https:\/\/www.youtube.com\/watch?v=MfmNLdmHa7U\"\u003evideo\u003c\/a\u003e to learn more.\u003cbr\u003eRead \u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\"\u003eWhite Paper\u003c\/a\u003e. \u003c\/div\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eCNC Kitchen - \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\"\u003eBondtech CHT Review\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Bondtech","offers":[{"title":"0.4mm","offer_id":39698346475591,"sku":"600-C-CHT-VOL-175-40","price":24.99,"currency_code":"USD","in_stock":true},{"title":"0.6mm","offer_id":39698346541127,"sku":"600-C-CHT-VOL-175-60","price":24.99,"currency_code":"USD","in_stock":true},{"title":"0.8mm","offer_id":39698346573895,"sku":"600-C-CHT-VOL-175-80","price":24.99,"currency_code":"USD","in_stock":true},{"title":"1.0mm","offer_id":39698346606663,"sku":"600-C-CHT-VOL-175-10","price":24.99,"currency_code":"USD","in_stock":true},{"title":"1.2mm","offer_id":39698346508359,"sku":"600-C-CHT-VOL-175-12","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/products\/Bondtech-CHT-Volcano-HDR-2500px.jpg?v=1669590322"},{"product_id":"bondtech-cht-bimetal-coated-brass-nozzle","title":"Bondtech CHT™ BiMetal Coated Brass Nozzle","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003eIn stock, quantities limited.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eCopper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials.\u003c\/h4\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cb\u003eNozzle is supplied with Nickel Coating.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4\u003eALERT : Avoid Cold Bondtech CHT Nozzles Change\u003c\/h4\u003e\n\u003cp\u003eHeat up the heat block up tp 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. \u003ca href=\"https:\/\/www.bondtech.se\/2023\/01\/27\/how-to-properly-tighten-a-bondtech-bimetal-cht-nozzle\/\" data-mce-fragment=\"1\" target=\"_blank\"\u003e\u003cb data-mce-fragment=\"1\"\u003eUse at most 1.0 Nm torque\u003c\/b\u003e.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003emanufactured by Bondtech in-house\u003c\/b\u003e, and will fit the following hotends\/blocks:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMosquito and Mosquito Magnum\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMosquito Liquid\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMosquito Magnum+\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCopperhead\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eE3D V4, V5, and V6 blocks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eE3D Chimera and Kraken\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRepRap M6 \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMain Advantages\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCopper body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardened Vanadium Steel inserts\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.40, 0.50, 0.60, 0.80, and 1.0mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eALERT : Size limitation for fiber loaded filaments\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eFor Carbon or Glass fiber loaded abrasive filaments use only 0.6, 0.8 and 1.0mm nozzle size.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4\u003eALERT : For particle loaded filaments\u003c\/h4\u003e\n\u003cp\u003eFor metal, wood, glitter or other \u003cb\u003eparticle\u003c\/b\u003e loaded abrasive filaments you may use the 0.4mm nozzle size.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT™ technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA nickel coating is applied to the coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003csection id=\"section_5237777\" class=\"section\"\u003e\n\u003cdiv class=\"bg section-bg fill bg-fill bg-loaded\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-657341818\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-539396149\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch4\u003eRecommendations:\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eUse this nozzle with the any materials\u003c\/strong\u003e\u003cb\u003e.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-1369719879\" class=\"row row-collapse align-middle\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1282118927\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMore Information:\u003cbr\u003e\u003c\/strong\u003eWatch this \u003ca href=\"https:\/\/www.youtube.com\/watch?v=MfmNLdmHa7U\"\u003evideo\u003c\/a\u003e to learn more.\u003cbr\u003eRead \u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\"\u003eWhite Paper\u003c\/a\u003e. \u003c\/div\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eCNC Kitchen - \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\"\u003eBondtech CHT Review\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Bondtech","offers":[{"title":"0.4mm","offer_id":39908910039111,"sku":"600-A-CHT-MOS-175-40","price":39.99,"currency_code":"USD","in_stock":true},{"title":"0.5mm","offer_id":42611780845639,"sku":"NOZ01CHT41058","price":39.99,"currency_code":"USD","in_stock":true},{"title":"0.6mm","offer_id":39908910104647,"sku":"600-A-CHT-MOS-175-60","price":39.99,"currency_code":"USD","in_stock":false},{"title":"0.8mm","offer_id":39908910137415,"sku":"600-A-CHT-MOS-175-80","price":39.99,"currency_code":"USD","in_stock":true},{"title":"1.0mm","offer_id":39908910170183,"sku":"600-A-CHT-MOS-175-10","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/products\/Bondtech-CHT-CopperVanad-8834-2500px-scaled.jpg?v=1718748188"},{"product_id":"bondtech-cht-mk8-bimetal-coated-brass-nozzle","title":"Bondtech CHT™ **MK8** BiMetal Coated Brass Nozzle","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIn stock, quantities limited.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eCopper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials.\u003c\/h4\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cb\u003eNozzle is supplied with Nickel Coating.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4\u003eALERT : Avoid Cold Bondtech CHT Nozzles Change\u003c\/h4\u003e\n\u003cp\u003eHeat up the heat block up tp 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. \u003ca href=\"https:\/\/www.bondtech.se\/2023\/01\/27\/how-to-properly-tighten-a-bondtech-bimetal-cht-nozzle\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.bondtech.se\/2023\/01\/27\/how-to-properly-tighten-a-bondtech-bimetal-cht-nozzle\/\" target=\"_blank\"\u003e\u003cb data-mce-fragment=\"1\"\u003eUse at most 1.0 Nm torque\u003c\/b\u003e.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003emanufactured by Bondtech in-house\u003c\/b\u003e, and will fit the following hotends\/blocks:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ebq Hephestos, Hephestos 2, Hephestos i3, Witbox, Witbox 2\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCreality CR-10, CR-10-S4, CR-10-S5, CR-10S, CR-10 V2, CR-6 SECR-20 Pro\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMakerBot Replicator, Replicator 2, Replicator 2X\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCrealithy Ender 2, Ender 3, Ender 5\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCraftbot\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTevo Tornado\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMain Advantages\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCopper body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.40, 0.60, 0.80, and 1.0mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT™ technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA nickel coating is applied to the coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003csection id=\"section_5237777\" class=\"section\"\u003e\n\u003cdiv class=\"bg section-bg fill bg-fill bg-loaded\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-657341818\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-539396149\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch4\u003eRecommendations:\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eUse this nozzle with the following materials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003eHIPS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003eTPU\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003eNylon\u003c\/li\u003e\n\u003cli\u003ePETG\u003c\/li\u003e\n\u003cli\u003eASA\u003c\/li\u003e\n\u003cli\u003ePP\u003c\/li\u003e\n\u003cli\u003ePVA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-1369719879\" class=\"row row-collapse align-middle\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1282118927\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cp\u003e\u003cb\u003eFor technical and abrasive materials, use other nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMore Information:\u003cbr\u003e\u003c\/strong\u003eWatch this \u003ca href=\"https:\/\/www.youtube.com\/watch?v=MfmNLdmHa7U\"\u003evideo\u003c\/a\u003e to learn more.\u003cbr\u003eRead \u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\"\u003eWhite Paper\u003c\/a\u003e. \u003c\/div\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eCNC Kitchen - \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\"\u003eBondtech CHT Review\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Bondtech","offers":[{"title":"0.4mm","offer_id":39908914561095,"sku":"600-A-CHT-MK8-175-40","price":39.99,"currency_code":"USD","in_stock":true},{"title":"0.6mm","offer_id":39908914593863,"sku":"600-A-CHT-MK8-175-60","price":39.99,"currency_code":"USD","in_stock":true},{"title":"0.8mm","offer_id":39908914626631,"sku":"600-A-CHT-MK8-175-80","price":39.99,"currency_code":"USD","in_stock":true},{"title":"1.0mm","offer_id":39908914659399,"sku":"600-A-CHT-MK8-175-10","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/files\/bondtech_600-A-CHT-MK8-175-T_cht-bimetal-MK8-coated-nozzles-triad_3750x2500-1-scaled.jpg?v=1718748192"},{"product_id":"bondtech-cht-bimetal-coated-brass-nozzle-volcano-compatible","title":"Bondtech CHT™ Bimetal Coated Brass Nozzle (Volcano Compatible)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003eIn stock, quantities limited.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCopper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials.\u003c\/h3\u003e\n\u003ch4\u003eALERT : Avoid Cold Bondtech CHT Nozzles Change\u003c\/h4\u003e\n\u003cp\u003eHeat up the heat block up to 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. \u003ca href=\"https:\/\/www.bondtech.se\/2023\/01\/27\/how-to-properly-tighten-a-bondtech-bimetal-cht-nozzle\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cb\u003eUse at most 1.0 Nm torque\u003c\/b\u003e.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003emanufactured by Bondtech in-house\u003c\/b\u003e, and will fit the following hotends\/blocks:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eE3D Volcano blocks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOther Volcano type blocks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eArtillery Sidewinder X1 and X2\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnycubic Vyper\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFLSUN Super Racer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eArtillery Genius Pro\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAnycubic Kobra and Kobra Max\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLulzbot TAZ MOARstruder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMain Advantages\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCopper body\u003c\/li\u003e\n\u003cli\u003eHardened Vanadium Steel inserts\u003c\/li\u003e\n\u003cli\u003eNickel coating\u003c\/li\u003e\n\u003cli\u003eHigher melt capacity\u003c\/li\u003e\n\u003cli\u003eAffordable price\u003c\/li\u003e\n\u003cli\u003eMachined with ultra-precision\u003c\/li\u003e\n\u003cli\u003eBrass nozzle with Nickel coated surface\u003c\/li\u003e\n\u003cli\u003eOptimized for 1.75mm, compatible with 2.85\/3.0mm filament \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e\n\u003ch4\u003eALERT : Size limitation for fiber loaded filaments\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eFor Carbon or Glass fiber loaded abrasive filaments use only 0.6, 0.8 and 1.0mm nozzle size.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4\u003eALERT : For particle loaded filaments\u003c\/h4\u003e\n\u003cp\u003eFor metal, wood, glitter or other \u003cb\u003eparticle\u003c\/b\u003e loaded abrasive filaments you may use the 0.4mm nozzle size.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT™ technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA nickel coating is applied to the coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003csection id=\"section_5237777\" class=\"section\"\u003e\n\u003cdiv class=\"bg section-bg fill bg-fill bg-loaded\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-657341818\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-539396149\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch4\u003eRecommendations:\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eUse this nozzle with the following materials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003eHIPS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003eTPU\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003eNylon\u003c\/li\u003e\n\u003cli\u003ePETG\u003c\/li\u003e\n\u003cli\u003eASA\u003c\/li\u003e\n\u003cli\u003ePP\u003c\/li\u003e\n\u003cli\u003ePVA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-1369719879\" class=\"row row-collapse align-middle\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1282118927\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cp\u003e\u003cb\u003eFor technical and abrasive materials, use other nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMore Information:\u003cbr\u003e\u003c\/strong\u003eWatch this \u003ca href=\"https:\/\/www.youtube.com\/watch?v=MfmNLdmHa7U\"\u003evideo\u003c\/a\u003e to learn more.\u003cbr\u003eRead \u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\"\u003eWhite Paper\u003c\/a\u003e. \u003c\/div\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eCNC Kitchen - \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\"\u003eBondtech CHT Review\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"section\" id=\"section_5237777\"\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv class=\"row row-collapse align-middle\" id=\"row-1369719879\"\u003e\n\u003cdiv id=\"col-1282118927\" class=\"col small-12 large-12\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Bondtech","offers":[{"title":"0.4mm","offer_id":39908917051463,"sku":"600-A-CHT-VOL-175-40","price":44.99,"currency_code":"USD","in_stock":true},{"title":"0.6mm","offer_id":39908917084231,"sku":"600-A-CHT-VOL-175-60","price":44.99,"currency_code":"USD","in_stock":true},{"title":"0.8mm","offer_id":39908917116999,"sku":"600-A-CHT-VOL-175-80","price":44.99,"currency_code":"USD","in_stock":true},{"title":"1.0mm","offer_id":39908917149767,"sku":"600-A-CHT-VOL-175-10","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/products\/Bondtech-CHT-CopperVanad-Vol-8827-2500px-scaled.jpg?v=1669590326"},{"product_id":"bondtech-cht-coated-brass-nozzle-5-pack-e3dv6-mosquito","title":"Bondtech CHT® Coated Brass Nozzle 5 pack (E3Dv6\/Mosquito)","description":"\u003ch2 class=\"product-title product_title entry-title\"\u003eThese are nozzles for \u003cb\u003eHigh Flow\u003c\/b\u003e applications\u003c\/h2\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003ch4\u003eALERT : Avoid Cold Bondtech CHT Nozzles Change\u003c\/h4\u003e\n\u003cp\u003eHeat up the heat block up tp 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. \u003cb\u003eUse at most 1.5 Nm torque\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThey are \u003cb\u003emanufactured by Bondtech in-house\u003c\/b\u003e,\u003cbr\u003eand will fit the following hotends\/blocks:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMosquito® \/ Magnum\u003c\/li\u003e\n\u003cli\u003eMosquito® Liquid\u003c\/li\u003e\n\u003cli\u003eMosquito® Magnum+\u003c\/li\u003e\n\u003cli\u003eCopperhead™\u003c\/li\u003e\n\u003cli\u003eE3D V4, V5, and V6 blocks\u003c\/li\u003e\n\u003cli\u003eE3D Chimera and Kraken\u003c\/li\u003e\n\u003cli\u003eRepRap M6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e5 units per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eIncludes the following sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-958551254\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1307366291\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch4\u003eMain \u003cb\u003eBondtech CHT®\u003c\/b\u003e Advantages\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigher melt capacity by increasing the surface area of the heating walls\u003c\/li\u003e\n\u003cli\u003eAffordable price\u003c\/li\u003e\n\u003cli\u003eMachined with ultra-precision\u003c\/li\u003e\n\u003cli\u003eBrass nozzle with Nickel coated surface\u003c\/li\u003e\n\u003cli\u003eFollows nozzle standards:\n\u003cul\u003e\n\u003cli\u003eRepRap (M6×1×7.5×12.5)\u003c\/li\u003e\n\u003cli\u003eMK8 (M6×1×5×13)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMay be used with 1.75 or 2.85mm hotends.\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT® technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eCore Heating is a patented technology\u003c\/h4\u003e\n\u003cp\u003eRegistration number: \u003ca title=\"CHT nozzles patent\" href=\"https:\/\/worldwide.espacenet.com\/patent\/search\/family\/058772617\/publication\/EP3445568A1?q=pn%3DEP3445568A1\" target=\"_blank\"\u003eEP3445568A1\u003c\/a\u003e\u003cbr\u003eNozzles for 3D printers are made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and a lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.\u003c\/p\u003e\n\u003csection id=\"section_1711169535\" class=\"section\"\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-87686919\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-641755860\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch4\u003eRecommended Materials\u003c\/h4\u003e\n\u003cp\u003eUse this nozzle with the following materials:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003eHIPS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003eTPU\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003eNylon\u003c\/li\u003e\n\u003cli\u003ePETG\u003c\/li\u003e\n\u003cli\u003eASA\u003c\/li\u003e\n\u003cli\u003ePP\u003c\/li\u003e\n\u003cli\u003ePVA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-927774057\" class=\"row row-collapse align-middle\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1532929416\"\u003e\n\u003cp class=\"col-inner\"\u003e\u003cb\u003eFor technical and abrasive materials we recommend using other nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4 class=\"col-inner\"\u003eDifferent nozzle sets for different materials\u003c\/h4\u003e\n\u003cp class=\"col-inner\"\u003eWe recommend you to have several sets of nozzles because:\u003cbr\u003eUsing different materials with the same nozzles causes deposit build-up inside the nozzle.\u003cbr\u003eThese deposits will cause blockages.\u003cbr\u003eWe recommend changing nozzles when changing materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003ch4\u003eAdditional Resources:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" target=\"_blank\"\u003eCheck the White Paper: \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" target=\"_blank\"\u003e\"Increasing Melt Capacity With 3 Nozzle Features\"\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/2021\/09\/30\/the-bondtech-cht-nozzles-are-available-now\/\" target=\"_blank\"\u003eClick here\u003c\/a\u003e to know more about the Bondtech CHT® nozzles.\u003c\/p\u003e\n\u003cp\u003eCNC Kitchen - \u003ca href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\"\u003eBondtech CHT Review\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bondtech","offers":[{"title":"Default Title","offer_id":42372175265863,"sku":"BUNDLE-CHT-MOS-BRASS","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/products\/BondtechCHT-Pack-of-5-pic6.jpg?v=1643316498"},{"product_id":"bondtech-cht-coated-brass-nozzle-5-pack-volcano-compatible","title":"Bondtech CHT® Coated Brass Nozzle 5 pack (Volcano Compatible)","description":"\u003ch2 class=\"product-title product_title entry-title\"\u003eThese are nozzles for \u003cb\u003eHigh Flow\u003c\/b\u003e applications\u003c\/h2\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003eThey are \u003cb\u003emanufactured by Bondtech in-house\u003c\/b\u003e,\u003cbr\u003eand will fit the following hotends\/blocks:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eE3D Volcano\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e5 units per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eIncludes the following sizes : 0.4, 0.6, 0.8, 1.0, and 1.2;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-958551254\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1307366291\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch4\u003eMain \u003cb\u003eBondtech CHT®\u003c\/b\u003e Advantages\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigher melt capacity by increasing the surface area of the heating walls\u003c\/li\u003e\n\u003cli\u003eAffordable price\u003c\/li\u003e\n\u003cli\u003eMachined with ultra-precision\u003c\/li\u003e\n\u003cli\u003eBrass nozzle with Nickel coated surface\u003c\/li\u003e\n\u003cli\u003eFollows nozzle standards:\n\u003cul\u003e\n\u003cli\u003eRepRap (M6×1×7.5×12.5)\u003c\/li\u003e\n\u003cli\u003eMK8 (M6×1×5×13)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMay be used with 1.75 or 2.85mm hotends.\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT® technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eCore Heating is a patented technology\u003c\/h4\u003e\n\u003cp\u003eRegistration number: \u003ca title=\"CHT nozzles patent\" href=\"https:\/\/worldwide.espacenet.com\/patent\/search\/family\/058772617\/publication\/EP3445568A1?q=pn%3DEP3445568A1\" target=\"_blank\"\u003eEP3445568A1\u003c\/a\u003e\u003cbr\u003eNozzles for 3D printers are made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel-coated nozzles have more corrosion resistance and a lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.\u003c\/p\u003e\n\u003csection id=\"section_1711169535\" class=\"section\"\u003e\n\u003cdiv class=\"section-content relative\"\u003e\n\u003cdiv id=\"row-87686919\" class=\"row row-collapse\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-641755860\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ch4\u003eRecommended Materials\u003c\/h4\u003e\n\u003cp\u003eUse this nozzle with the following materials:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePLA\u003c\/li\u003e\n\u003cli\u003eABS\u003c\/li\u003e\n\u003cli\u003eHIPS\u003c\/li\u003e\n\u003cli\u003ePC\u003c\/li\u003e\n\u003cli\u003eTPU\u003c\/li\u003e\n\u003cli\u003eTPE\u003c\/li\u003e\n\u003cli\u003eNylon\u003c\/li\u003e\n\u003cli\u003ePETG\u003c\/li\u003e\n\u003cli\u003eASA\u003c\/li\u003e\n\u003cli\u003ePP\u003c\/li\u003e\n\u003cli\u003ePVA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"row-927774057\" class=\"row row-collapse align-middle\"\u003e\n\u003cdiv class=\"col small-12 large-12\" id=\"col-1532929416\"\u003e\n\u003cp class=\"col-inner\"\u003e\u003cb\u003eFor technical and abrasive materials we recommend using other nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4 class=\"col-inner\"\u003eDifferent nozzle sets for different materials\u003c\/h4\u003e\n\u003cp class=\"col-inner\"\u003eWe recommend you to have several sets of nozzles because:\u003cbr\u003eUsing different materials with the same nozzles causes deposit build-up inside the nozzle.\u003cbr\u003eThese deposits will cause blockages.\u003cbr\u003eWe recommend changing nozzles when changing materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003ch4\u003eAdditional Resources:\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" target=\"_blank\"\u003eCheck the White Paper: \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" target=\"_blank\"\u003e\"Increasing Melt Capacity With 3 Nozzle Features\"\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/2021\/09\/30\/the-bondtech-cht-nozzles-are-available-now\/\" target=\"_blank\"\u003eClick here\u003c\/a\u003e to know more about the Bondtech CHT® nozzles.\u003c\/p\u003e\n\u003cp\u003eCNC Kitchen - \u003ca href=\"https:\/\/www.youtube.com\/watch?v=UNJdv5bFGOg\"\u003eBondtech CHT Review\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bondtech","offers":[{"title":"Default Title","offer_id":42372188307527,"sku":"BUNDLE-CHT-VOL-BRASS","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0239\/9287\/products\/Bondtech-CHT-for-Volcano-coated-brass-7468-2500px-scaled.jpg?v=1664297347"}],"url":"https:\/\/www.filastruder.com\/collections\/cht.oembed","provider":"Filastruder","version":"1.0","type":"link"}