E3D Revo Six (Prusa Edition)

$79.99

Voltage
Options

In stock, ready to ship. Scroll to the bottom for variant details.

As of 9/15/22, comes with new/improved heatercore (with blue thermistor insulation). Upgrade your old E3D V6 setup to Revo™ Six, a quick and easy drop-in replacement that gives you all the benefits of E3D’s RapidChange™ Revo ecosystem.

Note: Standard version has 1000mm cables and includes a fan and fan duct. Prusa version has 600mm cables and does not include a fan/fan duct, but is $5 cheaper.

Prusa MK2 printers use 12v. Prusa Mini and MK3/S+ printers use 24v. Always good to check your printer's power supply to confirm hotend voltage.

We are proud to be a
US distributor for E3D.  

Revo Six is a drop-in replacement for your E3D V6 HotEnd, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. · Same height, diameter, and mounting as the E3D V6 all-metal HotEnd
  • No machine redesign needed - drops right into your existing setup
  • Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening
  • Anodized black sink and crystal-clear fan mount with fan included *with standard version)
  • Revo HeaterCore included for faster, safer heating

Previous


Ready for Revo

Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today.

No machine redesign

Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print.

Enhanced performance

Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminum heaterblock, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway.

A new look.

An anodized black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd.

Key features

Max temp: 300C
Works with Revo HeaterCore and Revo Nozzles 

Kit contains

- 1 x Revo Six heatsink
- 1 x Collet
- 1 x Collet clip
- 1 x Extension cable kit (585mm heater cable in Prusa version, 640mm sensor cable with proper locking Molex SL connector in Prusa version)
- 1 x 100mm PTFE

Minimal kit:
- 1 x Revo HeaterCore 12V or 24V, 40 watts, with spring
- 1 x 0.40mm brass Standard Flow Revo Nozzle

Starter:
- 1 x Revo HeaterCore 12V or 24V, 40 watts, with spring
- 1 x 0.40, 0.60 brass Standard Flow Revo Nozzles

Fully loaded nozzle kit:
- 1 x Revo HeaterCore 12V or 24V, 40 watts, with spring
- 1 x 0.25, 0.40, 0.60, and 0.80mm brass Standard Flow Revo Nozzles

High flow kit:
- 1 x Revo HeaterCore 24V, 60 watts, with spring
- 1 x 0.40mm brass Standard Flow Revo Nozzle
- 1 x 0.40mm brass High Flow Revo Nozzle
- 1 x 0.60mm brass High Flow Revo Nozzle
- 1 x Fully Loaded sock kit

High flow X kit:
- 1 x Revo HeaterCore 24V, 60 watts, with spring
- 1 x 0.40mm brass Standard Flow Revo Nozzle
- 1 x 0.40mm ObXidian High Flow Revo Nozzle
- 1 x 0.60mm ObXidian High Flow Revo Nozzle
- 1 x Fully Loaded sock kit

High flow X kit:
- 1 x Revo HeaterCore 24V, 60 watts, with spring
- 1 x 0.40mm brass Standard Flow Revo Nozzle
- 1 x 0.40mm ObXidian High Flow Revo Nozzle
- 1 x 0.60mm ObXidian High Flow Revo Nozzle
- 1 x Fully Loaded sock kit

Genius kit:
- 1 x Revo HeaterCore 24V, 60 watts, with spring
- 1 x 0.25mm brass Standard Flow Revo Nozzle
- 1 x 0.40mm brass non-planar/belt Revo Nozzle
- 1 x 0.40mm ObXidian Revo Nozzle
- 1 x 0.60mm ObXidian High Flow Revo Nozzle
- 1 x 0.60mm High Temperature Abrasive Revo Nozzle
- 1 x Fully Loaded sock kit
- 1 x Revo Heaterblock
- 1 x High Precision Heater Cartridge, 24v/40w
- 1 x PT100 or PT1000 temperature sensor

Genius metal kit:
- 1 x Revo HeaterCore 24V, 60 watts, with spring
- 1 x 0.25mm brass Standard Flow Revo Nozzle
- 1 x 0.40mm brass non-planar/belt Revo Nozzle
- 1 x 0.40mm ObXidian Revo Nozzle
- 1 x 0.60mm ObXidian High Flow Revo Nozzle
- 1 x 0.60mm High Temperature Abrasive Revo Nozzle
- 1 x Fully Loaded sock kit
- 1 x Revo Heaterblock
- 1 x High Precision Heater Cartridge, 24v/40w
- 1 x PT100 or PT1000 temperature sensor
- 1 x 0.4mm Diamondback nozzle

Material compatibility

1.75mm

Mount system

Groove mount

Voltage

12V or 24V

Dimensions

Diameter: 16.2mm
Length: 62.4mm